Focusrite RedNet HD32R 32x32 Pro Tools HD Dante Interface

Overview

The Focusrite RedNet HD32R is a professional 32x32 Dante interface designed to connect Pro Tools | HD, HDX, and compatible HD Native systems directly to a Dante audio-over-IP network. Housed in a rugged 1U rackmount chassis, it provides up to 32 inputs and 32 outputs at sample rates up to 96kHz, with 16x16 operation available at 176.4 and 192kHz.

With dual Mini DigiLink connections, dual redundant Dante network ports, dual internal power supplies, Loop Sync, Word Clock, and comprehensive RedNet software support, the HD32R provides a flexible bridge between traditional Pro Tools workflows and modern networked audio systems.

Key Features

• 32x32 Dante-to-Pro Tools | HD interface
• Up to 32 inputs and 32 outputs at sample rates up to 96kHz
• 16x16 operation at 176.4kHz and 192kHz
• Direct connection to Pro Tools | HD, HDX, and HD Native systems
• Primary and Expansion Mini DigiLink connections
• Dual locking etherCON Dante network ports
• Redundant and Switched Dante network modes
• Dual internal power supplies with automatic failover
• Loop Sync input and output for Pro Tools system integration
• Word Clock input and output with switchable input termination
• 24-bit digital audio operation
• Support for standard Cat 5e and Cat 6 Ethernet cabling
• Front-panel monitoring of power, network, clock, sample rate, and signal status
• Remote monitoring and configuration through RedNet Control
• Compact 1U, 19-inch rackmount design

Dante to Pro Tools | HD Integration

RedNet HD32R provides a direct link between a Dante audio network and a Pro Tools | HD system. Dante sources and destinations can be routed to Pro Tools through the HD32R while maintaining a familiar Pro Tools workflow, allowing networked RedNet interfaces and other Dante-compatible devices to become part of the recording and production system.

32x32 Channel Capacity

The HD32R provides 32 inputs and 32 outputs at sample rates up to 96kHz, appearing to Pro Tools as two 16-channel interfaces. At 176.4kHz and 192kHz, the available channel count becomes 16x16, making the interface suitable for both high-channel-count sessions and higher-resolution workflows.

Dual Mini DigiLink Connectivity

A pair of Mini DigiLink connections provides direct communication with Pro Tools | HD systems. The Primary port handles the main connection, while the Expansion port can be used to connect an additional compatible Avid or Digidesign interface or to integrate the HD32R into a larger Pro Tools I/O configuration.

Flexible Dante Networking

Two locking etherCON network connections provide flexible Dante integration. In Redundant mode, the ports can connect to two independent networks for network resilience. In Switched mode, the integrated network switch allows devices to be daisy-chained, simplifying cabling in suitable installations.

Redundant Power Supply

Two independent internal power supplies provide an additional layer of reliability for critical-path applications. Each supply has its own IEC input and status monitoring, allowing one supply to operate as a backup if the primary power source fails. An uninterruptible power source can also be connected to the secondary input.

Professional Clocking

RedNet HD32R supports internal clocking, Word Clock, Loop Sync, and Dante network clock sources. Word Clock input and output are provided on BNC connectors, while Loop Sync connections allow the HD32R to integrate seamlessly with other Pro Tools interfaces such as HD I/O and Sync HD.

Low-Latency Pro Tools Workflow

By connecting directly to Pro Tools | HD through Mini DigiLink, the HD32R allows users to retain the low-latency performance and established routing workflow of Pro Tools HD systems while gaining access to the scalability and flexible routing of Dante networking.

RedNet Control and System Monitoring

RedNet Control provides remote monitoring of connected RedNet devices and key HD32R status information. Front-panel indicators provide immediate feedback for PSU status, Dante network connections, network lock, sample rate, clock source, and signal activity.

Multi-Workstation and Networked Studio Systems

Dante networking allows multiple workstations and compatible interfaces to share networked audio resources. This makes the HD32R particularly useful for multi-room facilities, post-production environments, broadcast systems, and larger recording studios where audio sources and destinations may need to be accessed from different locations.

Typical Uses

• Pro Tools | HD and HDX studio systems
• Professional recording studios
• Post-production facilities
• Broadcast and television facilities
• Live sound systems
• Dante audio-over-IP installations
• Multi-room recording facilities
• Networked studio infrastructure
• Integration of RedNet interfaces with Pro Tools
• Systems requiring redundant network and power connections

Specifications

• Type: Dante-to-Pro Tools | HD interface
• Channel Count: 32x32 up to 96kHz
• High Sample Rate Channel Count: 16x16 at 176.4kHz and 192kHz
• Resolution: 24-bit
• Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4 and 192kHz
• Pro Tools Connection: 1 x Primary Mini DigiLink, 1 x Expansion Mini DigiLink
• Network Connections: 2 x locking etherCON, compatible with standard RJ45
• Network Modes: Redundant and Switched
• Word Clock Input: 1 x BNC, 75 ohm, switchable termination
• Word Clock Output: 1 x BNC, 75 ohm
• Loop Sync Input: 1 x BNC
• Loop Sync Output: 1 x BNC
• Clock Sources: Internal, Word Clock, Loop Sync, or Dante Network Master
• External Word Clock Range: Nominal sample rate ±7.5%
• Power Supplies: 2 x internal universal power supplies
• Power Inputs: 2 x IEC
• Power Requirement: 100–240V AC, 50/60Hz
• Power Consumption: 30VA
• Rack Format: 1U, 19-inch
• Dimensions: 465 × 263 × 31.8mm
• Weight: 3.9kg
• Maximum Operating Temperature: 50°C

What's Included

• Focusrite RedNet HD32R
• 2 x IEC AC Mains Cables
• 2 x IEC Mains Cable Retaining Clips
• 2m Cat 6 Ethernet Cable
• Safety Information Sheet
• RedNet Getting Started Guide
• Product Registration Card
• Dante Virtual Soundcard download token and instructions

Note: Mini DigiLink cables for connection to Pro Tools are not included and must be purchased separately.

Why Choose the Focusrite RedNet HD32R?

The Focusrite RedNet HD32R provides a practical way to combine established Pro Tools | HD workflows with the flexibility of Dante audio networking. Its 32x32 channel capacity, dual Mini DigiLink connections, redundant Ethernet and power supplies, professional clocking options, and compact 1U design make it well suited to demanding recording, post-production, broadcast, and live sound systems.